GardenCalcs.uk
Resin Bound Gravel Calculator
Calculate resin and aggregate quantities for resin-bound surfaces.
Total surface area to be covered with resin-bound gravel
Finished depth — 15mm for pedestrian, 18-20mm for driveways
Finer single-grade stone gives a smoother finish and needs slightly more resin to coat (more surface area); coarser stone needs slightly less. This nudges the resin ratio by ±1 point.
Extra material for uneven base, edges and mixing loss (8-12% typical)
Density of kiln-dried aggregate — ~1,600 matches manufacturer kit coverage (100 kg per ~3.55 m² at 18mm); heavier stone runs higher
Base resin weight as a percentage of aggregate — ~7.5% for a standard 2-5mm mix. The selected aggregate grade adjusts this by ±1 point.
How We Calculate This
This calculator estimates resin, aggregate and primer quantities for resin-bound surfaces.
Aggregate
Aggregate (kg) = Area × Depth × Density. We default to 1,600 kg/m³ for kiln-dried quartz gravel, which matches manufacturer kit coverage (~3.55 m² per 100 kg at 18 mm). Adjust for your specific stone.
Resin
Resin (kg) = Aggregate × Resin ratio. A standard 2-5mm mix is around 7-8% resin by weight (a typical 100 kg + 7.5 kg kit is ~7.5%). A finer single-grade 1-3mm stone has more surface area to coat so takes a touch more resin, and coarser 3-6mm stone a touch less — the calculator nudges the ratio by ±1 point for the selected grade.
Primer
A PU primer coat seals the prepared base before laying. One 5L tin covers ~40 m², so we dose at ~0.125 litres per m². (Epoxy primers are thicker, nearer 0.2 L/m².)
Frequently Asked Questions
Aggregate (kg) = area (m²) × depth (m) × dried-aggregate density (≈1,600 kg/m³). Resin (kg) = aggregate × the resin ratio (≈7-8% by weight for a standard 2-5mm mix, a little higher for fine single-grade stone). Primer is dosed at ~0.125 L/m² (one 5L tin covers ~40 m²). A wastage factor is then added for mixing loss and edges.
Yes, 8-12% is sensible for resin-bound work. Hand-mixing leaves resin and aggregate in the bucket and forced-action mixer, and uneven bases or fiddly edges use more material than a flat rectangle suggests.
Resin-bound kits are not sold in ordinary garden centres — they come from specialist resin-bound suppliers (e.g. Daltex/Resin Bonded Aggregates, SureSet, PermaPave/GCL, Polybound). Kits pair kiln-dried UV-stable aggregate (typically 100 kg) with a matched UVR polyurethane binder (typically 7.5 kg) plus a separate PU primer.
Resin-bound: aggregate is mixed with resin and trowelled smooth, giving a permeable, flat surface. Resin-bonded: resin is applied to the surface and aggregate scattered on top, giving a textured finish.
Yes, resin-bound surfaces are fully permeable (SuDS compliant) when laid correctly over a porous base. This means no planning permission needed for front drives in most cases.
Related Calculators
Gravel Calculator
Work out gravel quantities in tonnes or bulk bags for drives and paths.
Block Paving Calculator
Calculate block paving quantities with wastage allowance.
Paving Slab Calculator
Calculate how many paving slabs you need for a patio or path.
Patio Area Calculator
Calculate patio area and materials for rectangular or L-shaped patios.
Stepping Stone Calculator
Work out stepping stone quantities and spacing for garden paths.
Was this calculator helpful?
One tap. Votes are anonymous and carry the page address, your device type, screen size and country, the numbers in the form and the results on screen, so we can check the answer you saw.
Last updated: February 2026
All calculations are estimates based on standard gardening guidelines. Results may vary with soil conditions, climate, and plant varieties.