GardenCalcs.uk
Trellis Calculator — Panel Quantities & Fixings
Work out trellis panel quantities and fixing requirements.
Total length of wall or fence to cover, measured along the run; deduct gate or door openings you won't trellis.
Finished trellis height — pick a standard panel size (0.3/0.6/0.9/1.2/1.5/1.83m). On top of an existing fence, keep the combined height under 2m for permitted development.
Width of one trellis panel; UK standard is 1.83m (6ft). Narrower panels mean more panels per metre of run.
Fixings per panel — minimum two per side, 6–8 for a 1.83m panel face-fixed with clips or battens.
How We Calculate This
Panels needed = ceil(Wall/Fence Length ÷ Panel Width). Trellis comes in the finished height you choose, so you count panels along the run only — taller trellis does not change the count. Each panel takes about 6–8 fixing screws (minimum two per side).
Frequently Asked Questions
Use galvanised trellis clips or treated timber battens screwed into the fence posts, not the panels. For face-fixing, drive 4.5 × 50mm screws through the trellis frame into the post — minimum two per side, typically 6–8 screws per 1.83m-wide panel. Leave a 25–50mm gap behind the trellis so climbers can twine through.
Yes — adding trellis on top of an existing fence is common, but the combined fence-plus-trellis height counts as a single structure under permitted development. A boundary adjoining a road must stay below 1m; any other boundary below 2m, or you need planning permission.
Standard UK trellis is 1.83m (6ft) wide and sold in finished heights of roughly 0.3, 0.6, 0.9, 1.2, 1.5 and 1.83m (Jacksons Fencing). You buy the height you want as one panel — you do not stack short panels to build up height. Square and diamond lattice patterns are both common.
Panels run along the length only: divide the wall or fence run by the panel width (1.83m as standard) and round up. For a 3m run that is two panels. Choose the panel height to match the screening you want — taller panels do not need more posts or panels per metre.
Clematis, honeysuckle and jasmine are popular for scent and flower. For evergreen screening use ivy, star jasmine (Trachelospermum) or evergreen clematis. For an edible crop try climbing French beans, runner beans, peas or a grape vine on a warm, sunny aspect.
Related Calculators
Fence Post Calculator
Work out the number of fence posts and spacing for your fence run.
Sleeper Calculator
Work out how many railway sleepers you need for raised beds or retaining walls.
Post Concrete Calculator
Work out how much postcrete or concrete you need for fence posts.
Fence Panel Calculator
Calculate how many fence panels you need for your boundary.
Edging Calculator
Calculate lawn or border edging quantities for straight and curved runs.
Was this calculator helpful?
One tap. Votes are anonymous and carry the page address, your device type, screen size and country, the numbers in the form and the results on screen, so we can check the answer you saw.
Last updated: February 2026
All calculations are estimates based on standard gardening guidelines. Results may vary with soil conditions, climate, and plant varieties.