Skip to content

Edging Calculator — Lawn & Border Edging

Calculate lawn or border edging quantities for straight and curved runs.

Total run of lawn or border edge to be edged, in metres. Measure along the outside of any curves so you don't under-order.

Product type sets the piece length automatically: metal & plastic strips 1m, a brick laid end-on 21.5cm, log roll 1.8m. Metal and plastic also add ground pegs.

How We Calculate This

Pieces = (Total Length ÷ effective piece length) × waste factor, rounded up. Metal and plastic strips are 1m, a brick laid end-on is 0.215m and log roll is 1.8m. The effective length subtracts any overlap you set. Metal and plastic edging are anchored with ground pegs (default 3 per 1m strip, roughly one every 30cm), so ground pegs = pieces × pegs per piece. Brick and log roll need no pegs.

Frequently Asked Questions

Was this calculator helpful?

One tap. Votes are anonymous and carry the page address, your device type, screen size and country, the numbers in the form and the results on screen, so we can check the answer you saw.

Last updated: February 2026

All calculations are estimates based on standard gardening guidelines. Results may vary with soil conditions, climate, and plant varieties.